Saxon Goods Lifts

Saxon Surface Mounted Goods Only Lifts are designed and manufactured utilising high quality well engineered components. Direct acting hydraulic actuated telescopic lift rams are utilised to provide a safe, smooth operating, auto-self levelling system.

No ropes or chains are employed in the lift mechanism as these require mandatory regular inspection and periodic renewal which result in high operational costs.

The free standing, self supporting modular design can be either surface mounted and accessed at low level by a shallow ramp or recessed 80mm deep into the floor screed.

The lift unit is easily and quickly assembled on site and can be readily repositioned should the occasion arise. The lift gates are of folding shutter design and not the cumbersome hinged door type.

Special design features

low cost of ownership
1250kg or 2000kg capacity
no lift pit required
will serve three levels to six metres
high frequency operation
fully gated lift car, essential for roll cages etc.
lift car roof lighting
fail safe operation
optional buffer post protection and access ramp
emergency lowering in event of mains failure
easily and safely maintained
design complies with CE machinery directive